- Ideal sling-style strap for lightweight mirrorless cameras and other small SLR cameras
- Neoprene pad with non-skid surface
- Fits tight connection areas with a 1.5mm cord (Note: if your camera has lugs designed for split rings, we recommend attaching a split ring to avoid any sharp edges or burrs from cutting the cord)
- Includes an additional Mini QD Extension™ for security lanyard
The Mirrorless Sling offers unparalleled comfort and convenience when shooting with a mirrorless camera or other small SLR camera. It allows the camera to be carried discretely at the side yet the camera glides easily up the strap into shooting position. If smaller connectors are needed, check out our System Connectors - Mini QD Loops™ (1mm).
The Mirrorless Sling offers unparalleled comfort and convenience when shooting with a lightweight mirrorless camera or other small SLR camera. It allows the camera to be carried discretely at the side yet the camera glides easily up the strap into shooting position.
The Mirrorless Sling can be worn on the left or right shoulder. The camera is attached to the front Mini QD Loop™ connector so that when raised into shooting position the strap is out of the way. The sling can be attached using only this one connector if desired; however, the security tether can be easily attached to the other side of the camera for added peace of mind. When attached properly, the strap will be out of the way when in the shooting position. If a longer configuration is needed when using the single-point connection option, the Mini QD Extension™ included in the tether can be used to give that added bit of length (6”-9” or 15,2 – 22,9cm) to the primary attachment point.
The Mirrorless Sling is the ideal accessory for the popular mirrorless cameras hitting the market. Be sure to make it part of your essential gear!
|* Note: The recommended load is the amount of weight that can be comfortably carried on the strap. Straps can safely carry much more.
** One Mini QD Loop™ connector is sufficient for supporting a lightweight camera.
† The Mirrorless Sling™ is measured from top of shoulder to end of Mini QD Loop™ connector
|Recommended Comfort Load *||Up to 2.5 lbs (1,13 kg)|
|Tensile Strength||Each Mini QD Connector: 44lbs (20kg)|
|Connection Points||1 or 2|
|Connection Type||1.5mm Mini QD Loop **|
|Strap Length||Fully adjustable 27.5"–32" (69,9cm–81,3cm) †|
|Materials||Neoprene pad with non-skid surface and leather tabs|
|Pad Dimensions||1.5" x 16" (3,8cm x 40,6cm)|
|Quick Disconnects||Yes, attaches to the main neoprene pad with a 3/4" Quick Disconnect
Attaches to the camera using 1.5mm cord loop with 3/8" Mini QD Connector™
|Made in the USA||Yes|
|Stock #||Style||Color||MSRP||Approximate Size|
|1601512||Mirrorless Sling||Black||$26.95||42–52 in (106,7–132,1 cm)|
Recommended Connection Types for direct attachment with the Mini QD Loop
How to Attach a Mini QD Loop to your Camera
1. Thread small cord loop through connection point on camera.
2. Thread mini quick disconnect through opening of loop.
3. Pull mini quick disconnect to tighten knot.
Attaching a Mini QD Loop to camera lugs designed for split rings
Cameras with lugs designed for use with split rings are typically not de-burred as precisely as other connectors; therefore, we recommend using split rings so that there is no risk of damage to the strap from being cut by sharp edges or burrs in the lug.
Questions & AnswersNo questions have been asked regarding this product.
Buy from a Dealer
Factory-direct shipping is available in the USA only.
It's always best to support your local dealer.
We understand that this may not always be an option due to location; therefore, we're always happy to take your factory-direct order. We ship throughout the USA only. (Please note: we no longer ship to Canada.) For shipments to other countries please locate one of our International Distributors.