Instructions - GRASP-IT

Thread your belt (not included) through the channel at the top edge of the GRASP-IT™. In this configuration the GRASP-IT™ is free to slide on the belt. If you would prefer that it remain stationary on the belt follow these steps.

1. 

   1. Thread your belt (not included) through the first half of the channel at the top edge of the GRASP-IT™ exiting through the belt loop slot as shown.

2. 

   2. Pass the belt through your belt loop

3. 

   3. Pass the belt through the second half of the channel at the top edge of the GRASP-IT™.

1. 

   4. Continue threading the belt though any remaining belt loops and fasten it as usual. In this configuration the GRASP-IT™ remains in a constant position and will not slide forward or backward on the belt.

2. 

   Attach your camera to a shoulder strap or sling. The lens of your camera fits through the opening in the GRASP-IT™ so that the camera body rests on top of it. This keeps the camera in place and always at the ready. You can orient the camera's grip in whatever direction you choose for easiest retrieval.

3. 

   When not in use, the GRASP-IT™ simply hangs flat at your side until it is needed.