Straps, Pouches and Accessories to fit Cameras, Lenses, Tripods and Electronics American FlagLook for the flag for products proudly made in the USA!

Videos

Reporter Strap™

MSRP $29.50

  • Comfortably and safely carries two cameras or a camera/binocular combination
  • Secondary strap can be easily detached for added versatility and convenience
  • Soft, durable neoprene pad stays securely in place with our Non-Slip Grip
  • Weight reduction system for added support
  • Fully adjustable in length: primary strap approx. 24"-51" (61cm-129,5cm); secondary strap approx. 31"-35" (78,7cm-88,9cm)

The Reporter Strap™ addresses the needs of today's active photographers who use two cameras to cover the diverse photo challenges presented in their work. Now two cameras or a camera/binocular combination can be comfortably worn with only one strap.

Available Colors

  • blackblack

Product Description

The Reporter Strap™ addresses the needs of today's active photographers who use two cameras to cover the diverse photo challenges presented in their work. Now two cameras or a camera/binocular combination can be comfortably worn with only one strap - the Reporter Strap™. This allows you to have better control of your gear while reducing the chance of damaging expensive equipment.

The Reporter Strap™ has quick disconnects on the primary strap so that using different connectors is a snap. The popular OP/TECH USA 3/8" System Connectors™ are standard on the primary strap. The secondary strap attaches to the main strap body with durable plastic clamps similar to the Reporter/Backpack System Connectors™. It features the exclusive OP/TECH USA Uni-Loop System Connectors™ which are compatible with numerous OP/TECH USA neck straps, hand straps, and harnesses. Top quality neoprene reinforced with durable elastic makes the equipment feel like half the weight. The Reporter Strap™ is also great for wildlife photographers carrying both a camera and binoculars. When in the field for long periods of time, OP/TECH USA's weight reduction comfort can make all the difference.

Details

 Reporter Strap™
* Note: The weight of an item is often perceived as being much heavier than the actual weight. The recommended load is the amount of weight that can be comfortably carried on the strap. Straps can safely carry much more.
** One Uni-Loop Connector™ is sufficient for supporting a camera. It has a static weight support of up to 146 pounds.
Recommended Comfort Load * Up to 15 lbs (6.8kg)
Tensile Strength Each 3/8" Connector: 146lbs (66kg)
Each Uni-Loop Connector: 146lbs (66kg)
Carry Style Neck, Shoulder
# of Connection Points Four
Connection Type Primary strap: two 3⁄8" (1cm) webbing connectors
Secondary strap: two Uni-Loop Connectors **
Strap Length Primary strap: adjustable 24"-51" (61cm–129,5cm)
Secondary strap: adjustable 31"-35" (78,7cm–88,9cm)
Pad Dimensions 2.5" (at widest) x 15" (6,3cm x 38,1cm)
Quick Disconnects Yes (on Primary and Secondary)
Materials Neoprene pad with durable elastic and Non-Slip Grip™, nylon webbing, and leather tabs
Webbing Width 1"
Made in the USA Yes

Stock Numbers

Stock #StyleColorMSRPApproximate Size
6501011 Reporter Strap™ Black $29.50 Primary strap: adjustable 24"-51" (61cm–129,5cm)
Secondary strap: adjustable 31"-35" (78,7cm–88,9cm)

Instructions

How to Attach a 3/8" Webbing Connector to your Camera (Primary Strap)

  1. 1. Pass the end of the webbing through the connector on the camera.

  2. 2. Pass it back through the first opening on the plastic buckle.

  3. 3. Pass it through the second opening on the plastic buckle.

  4. 4. Pull tight for a secure hold.


How to Attach a Uni Loop™ Connector to your Camera (Secondary Strap)

  1. 1. Thread Uni Loop™ through connection point on the right side of camera.

  2. 2. Thread quick disconnect through opening of Uni Loop™ Connector.

  3. 3. Pull quick disconnect to tighten knot.


Primary Strap

Simply remove the old strap and run the webbing through the retaining lugs or split rings. To adjust, follow the above diagrams.

Secondary Strap

Detach the Uni Loop connectors from the strap at the quick disconnects. Slide the 1/4" webbing through the retaining lug or split ring and create an opening to pass the quick disconnect through the loop. Pull the connector system tight to form a secure hold. Reattach quick disconnect to the strap. 

The secondary strap can be unclipped from the primary strap. It can also be attached to a photo vest or the shoulder straps of a backpack to form another style of camera or binocular strap.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Questions & Answers

Question:
I could not thread the 'Uni Loop" through the camera connection point on the Secondary Strap like it shows on the picture. Is there a trick to it? My problem is the "Uni Loop" is too thick and stiff to work through the connection point. HELP!! :)

Answer:
There is a little trick for getting the Uni Loop through really tight connection areas on cameras. Take a piece of thread and loop it through the Uni Loop. Then pull the thread through the connection area on your camera. By pulling on the thread you should be able to pull the Uni Loop through the connection area.
If this doesn't work you can also try using a round metal key ring. Get one small enough that will loop through the connection area of your camera and then attach the Uni Loop to the key ring.

 


Ask OP/TECH USA a Question

* Required Fields


We will email a response to your question as soon as possible.

Buy from OP/TECH USA

Factory-direct shipping is available in the USA only.

It's always best to support your local dealer.

We understand that this may not always be an option due to location; therefore, we're always happy to take your factory-direct order. We ship throughout the USA only. (Please note: we no longer ship to Canada.) For shipments to other countries please locate one of our International Distributors.

Availability: In stock
$29.50