Super Pro Strap™
- A choice of two designs fits most medium format & 35mm cameras with retaining lugs
- Easy to attach
- Fully adjustable 36"-45" (91,4cm-114,3cm)
- Control stretch neoprene pad incorporates a slight curve to allow the strap to rest lower on the neck
- Quick disconnects allow for Connection System capabilities
- Stays securely in place with our Non Slip Grip™
Finally, your medium format and other cameras with retaining lugs can benefit from OP/TECH USA's patented weight reduction system. The Super Pro Strap is available in a choice of two clip designs to better fit the different camera models.
Finally, your medium format and other cameras with retaining lugs can benefit from OP/TECH USA's patented weight reduction system. The Super Pro Strap™ is available in a choice of two clip designs (Version A and Version B) to better fit the different camera models on the market. Please refer to the table below to determine which version is right for your camera.
OP/TECH USA has developed a unique locking slide mechanism which adds extra protection for a secure connection. Once the metal clip is attached to the retaining lug, the plastic locking slide is secured in position behind the metal clip. This prevents the clip from inadvertently opening. The slide must be removed before the clip will open. This innovative design is only available from OP/TECH USA.
Super Pro Connectors are also available separately (without a strap pad.)
|Cameras||Version A||Version B|
|These are registered trademarks of companies other than OP/TECH USA.
This is only a partial list of the cameras which can use the Super Pro Strap™.
|Bronica (ETR and some ETRC)||Available|
|Canon EOS M (Must use supplied locks)||Available|
|Fujifilm GFX 50S||Available|
|Mamiya (except M645 Super and M645 Pro)||Available|
|Olympus IS1 and IS2||Available|
|Super Pro Strap™ version A and B|
|* Note: The weight of an item is often perceived as being much heavier than the actual weight. The recommended load is the amount of weight that can be comfortably carried on the strap. Straps can safely carry much more.|
|Recommended Comfort Load *||Up to 15 lbs (6.8kg)|
|Tensile Strength||Each Super Pro Connector: 146lbs (66kg)|
|Carry Style||Neck, Shoulder|
|# of Connection Points||Two|
|Connection Type||Custom metal clips (Versions A and B)|
|Strap Length||Fully adjustable 36"-45" (91,4cm-114,3cm)|
|Pad Dimensions||2.5" x 15" (6,3cm x 38,1cm)|
|Materials||Neoprene pad with Non-Slip Grip™, nylon webbing, leather tabs, elastic and metal clips|
|Made in the USA||Yes|
|Stock #||Super Pro Strap™ Style||Color||MSRP||Approximate Size|
|4201012||Design "A"||Black||$30.75||37"–46.5" (94cm–118,1cm)|
|5401012||Design "B"||Black||$30.75||37"–46.5" (94cm–118,1cm)|
How to Attach a Super Pro Connector to your Camera Watch Video
1. Insert the camera lug through the large hole in the clip which will force the spring clip upward.
2. Slide the clip back which will lock the camera lug in place. The spring clip should close behind the camera lug.
3. Move the retaining slide towards the clip.
4. Lock the retaining slide firmly in place behind the spring clip so that both pieces become one unit.
Questions & AnswersNo questions have been asked regarding this product.
Buy from a Dealer
Factory-direct shipping is available in the USA only.
It's always best to support your local dealer.
We understand that this may not always be an option due to location; therefore, we're always happy to take your factory-direct order. We ship throughout the USA only. (Please note: we no longer ship to Canada.) For shipments to other countries please locate one of our International Distributors.